Software update for the KLUG - Compact loading and update device

Short guide for self-updating the KLUG:

ATTENTION: Self-updating the KLUG is only possible via a PC using the ZPP Konfig (or ZSP) application.

• Use the online update function of ZPP Konfig (recommended)
  OR download the new KLUG software as a zip file from below on this webpage; unzip the file.
• For first use (or after changing the port)
  • Connect the KLUG to the PC using a USB cable
  • In the ZPP configuration menu, click ‘Settings’ then ‘Search for device’: the COM port to which the KLUG is connected will be searched for and found; click ‘OK’
• Prepare the KLUG: Disconnect the USB cable from the KLUG. Press and hold the self-update button on the KLUG. Connect the USB-C data cable from the PC to the KLUG, release the button after about 1 second. ➞ KLUG is now in update mode (bootloader) Status LED is NOT lit!
• The update is performed in the ZPP Konfig software via the menu item: KLUG Update
  In the Firmware field:
   click on Online Update -> ZPP Konfig automatically loads the current firmware OR
   click on File  to select a previously downloaded KLUG update file using the file browser.
• Start the process by clicking the Start update button.
• Once the update is complete, you can close the window by clicking Close or X.
• ➞ A blue status LED indicates that the KLUG is ready for use.
  If not: Disconnect the USB cable from the KLUG and reconnect it.