Load code for large scale sound decoders - Alexander Mayer LACOG-MAY

Instructions

To generate the requested load code, enter the ID of the decoder for which the sound project is to be activated in the fields above. It can be read from the corresponding CVs (via MXULF, ZPP Config, or ZSP). The ID consists of:

• CV #250: The decoder type (e.g., “6” for MS450, ‘16’ for MS481, “7” for MS990 –
                  can be read from CV #250, or see the MS/MN decoder operating instructions)
• CV #251: 1st part of the decoder serial number (0-255, e.g., 33)
• CV #252: 2nd part of the decoder serial number (0-255), e.g., 4)
• CV #253: Third part of the decoder serial number (0-255), e.g., 222)

(e.g., an MS450P22 with CV #250 = 6 and serial number 33.4.222

Then add the product ( load code ...) to your shopping cart.
Once you have entered the correct information, you can either go directly to the “Shopping Cart” (in the side menu) or select another product – to do this, go back to the product overview via the side menu or by clicking “Back.” The same product can also only be selected and purchased multiple times in this way, as different CV values must be entered for the decoder ID for each load code to be generated.

PLEASE CAREFULLY READ THE DECODER ID AND ENTER IT IN THE FIELDS!
Typing errors or transposed digits will result in incorrect IDs and thus incorrect loading codes that you cannot utilize. However, since this is still a valid loading code (for another decoder) and this information is received and thus “used” with the transmission, there is NO RIGHT OF RETURN.

After payment has been confirmed at the end of the purchase process, the load code(s) will be generated and issued as a 4-digit number.

The loading code is also included in the payment confirmation email, which is sent to the email address provided during registration. The order and thus the loading code can also be accessed at any time from this email (or by logging in as a registered user).

The generated download code can then be entered into CVs #260, #261, #262, and #263 to activate the sound project in the decoder.