More Info - Click on family name (MX620, MX63, ..) !                                    Go to Large scale decoders and function-, accessory decoders !
   

MX620

MX630                   MX630P  

 MX64H                MX64V      

 MX64D                  MX64DV   

MX640

 

Miniature decoder


13,5 x 8,8 x 2,5 mm ,
Total 0,8 A,
4 functions 0,3 A,
SUSI solder pads


MX620: 7 wires
MX620N: 6-pin direct
MX620R: 8-pin on wires
MX620F: 6-pin on wires

H0 decoder

20 x 11 x 3,5 mm ,
Total 1 A,
6 functions
       total 0,8 A,
2 logic level-, servo
outputs or SUSI via pads

MX630:  9 wires
MX630R:
8-pin NEM652
MX630F: 6-pin NEM651

Decoder mit
  16-pol. PluX-Stecker

20 x 11 x 3,5 mm ,
Total 1 A,
6
functions
       total 0,8 A,
2 logic level-, servo
outputs or SUSI
via PluX16.


MX630P

High power decoder


26 x 16 x 5 mm ,
Total 1,8 A,
8 functions
      2 x total 0,5 A,
2 logic level outputs,
SUSI with plug.

 

MX64H: 7 wires
MX64HR: 8-pin NEM652
MX64HF: 6-pin NEM651

Decoder with
  Low voltage output

26 x 16 x 5 mm,
Total 1,8 A,
8 functions
      2 x total 0,5 A,
2 logic level outputs,
SUSI with plug.

MX64V1 low volt. 1,5 V
MX64V5 low voltage 5 V.

Decoder with
   21-pin connector

20,5 x 15,5 x 4,5 mm ,
Total 1,2 A,
6 functions,
2 servo outputs,
SUSI via pads.

also for C-Sinus !


MX64D
MX64DM 

Decoder with
   21-pin connector and
   Low voltage output

   5,5 x 15,5 x 4,5 mm ,
Total 1,2 A,
6 functions,
2 servo outputs,
SUSI via pads,

with low volage output
 1,5 V


MX64DV1

H0 Sound Decoder

2 x 16 x 5 mm ,
Total 1,2 A,
6 funktions  0,8 A,
add.. 5 LED outputs 10 mA,
2 servo outputs, SUSI.

MX640: 11 wires
MX640R: 8-pin on wires
MX840F: 6-pin on wires
MX840D: 21-pin plug conn.
MX840C: 21-pin, C-Sinus

 
  All ZIMO decoders with   
 "RailCom" is a trademark of Lenz GmbH.

Go to German page !

All ZIMO decoders with all NMRA "high end" features and much more !

Back EMF, adjustable by special CVs,
noiselss high frequency motor control (20 / 40 kHz),
suitable for Faulhaber, Maxxon, etc.,
special acceleration procedures,
American lighting efffects, decoupler control, function output soft start, etc.,
RailCom ("bidirectional communication"),"SUSI" - interface, etc.

ZIMO decoders can be used with any DCC system - the user always gets the benefit of excellent driving chracteristics and from the big variety of function effects.

All ZIMO loco decoders are equipped with almost identical software - so all of them have identical features (the large scale decoders MX69 have many additional features because of more hardware resources).

All current ZIMO loco and accesory decoders can be upgraded (= loaded with a new software) by the end user, without opening the loco. For this ZIMO offers the Decoder Update device MXDECUP (or MXDECUPU with an USB-serial converter included).

ZIMO decoders - more info:

Signal controlled Speed Influence



 


Small scale decoders (MX620, MX630, MX64H, MX640) are availble with wires or with connectors.

 

 

MX620, MX630, ...
7 or 9 (depending on type) highly flexible wires (120 mm)

MX620R, MX630R, ...
8-pin plug (7 pins used) according to "medium interface" in NMRA RP 9.1.1), on 80 mm wires.

 

MX620F, MX630F, ...
6-pin coneector according to "small interface" in NMRA RP 9.1.1), on 80 mm wires.

 

MX620N  (there is no MX630N, etc. !):
6-pin connector, mounted directly on decoder, according to "small interface" in NMRA RP 9.1.1.

 

MX64D, MX640D, ...

Die 21-pin interface according to NMRA DCC RP 9.1.1,

Used in locomotives from Märklin, Trix, Brawa, Liliput,
and sometimes in scale 0.

MX630P, ...

„PluX“ is the upcoming standard for DCC locomotives, also desribed in NMRA DCC RP 9.1.1.

PluX“ is used in 3 versions: 8-, 16-, and 22-pin.

 Last update: 2009 07 20