ZIMO system update

Software update for MX10, MX10EC und MX32, MX32FU

Software-Update via USB drive:

For an update as easy as possible, every product (central command station and controllers) is equipped with a USB host socket, to which a USB drive with the new software can be connected.

Products that can be updated: (with these container files)

MX32 controller, tethered version
MX32FU controller, radio or tethered version
MX10 central command station (digital central or booster)

Notice: When using an MX32 on the base unit MX1 (2000 or HS) with current MX1-SW version 3.06, the MX32-SW version 01.18.0067 is required.

You can download a so-called container file from this webpage, which contains the new software for MX10 AND MX32(FU), and symbols and fonts. This way, only one zip-file has to be downloaded from the website. By unpacking the files, the zsb-file (the actual container file) can be stored on a USB drive.

This USB drive has to be connected then to EVERY product, one after the other (MX10, all MX32/FU) to carry out the update. This is done during operation; i.e. the devices are turned ON, whereby the trains on the layout best stand still. The USB drive is recognized automatically by each of the devices, reported on the display (facts to the update, version number, etc.) and then the update is started (or aborted manually).

First, a list to select the desired activity is displayed. The selection is done by the rotary knob (on MX10) or the scrolling wheel (MX32). Usually, the first (already marked) point is executed: MX10 Update all or MX32 automatic update.

To start the update, press the rotary knob (MX10) or the A-key (MX32).

After the update of the MX10, it has to be cold started. For this, please leave the MX10 disconnected from power for at least 1 minute, so the internal capacitor is discharged in any case.

During the update (some seconds on the MX10, a few minutes on the MX32 because a lot of pictures and graphics have to be loaded) neither power supply nor USB drive must be disconnected. At the ed of the process, the demand "Remove the USB drive" is displayed. The device restarts itself and is fully functional afterwards.

Further information concerning updates please see the instruction manuals of the individual devices/modules.

 

Expand the raws with infos on the update (mostly german) by clicking  Expand

Expand all  Expand Close all  Collapse

Date more ...     Description (mostly german) Download
2022 08 31 Expand

Software version 01.30.0002

expand  Expand
2022 06 08 Expand

Correction version 01.29.1000 to SW version 01.29.0106, ...0200, ...0400, ...0415, ...0422 and 01.29.0600

expand  Expand
2022 01 28 Expand

Correction version 01.29.0600 to SW version 01.29.0106, ...0200, ...0400, ...0415 and 01.29.0422

expand  Expand
2021 11 02 Expand

Correction version 01.29.0422 to SW version 01.29.0415, 01.29.0106, 01.29.0200 and 01.29.0400

expand  Expand
2021 10 21 Expand

Correction version 01.29.0415 to SW version 01.29.0106, 01.29.0200 and 01.29.0400

expand  Expand
2021 09 27 Expand

Correction version 01.29.0400 to SW version 01.29.0106 and 01.29.0200

expand  Expand
2021 05 07 Expand

Correction version 01.29.0200 to SW version 01.29.0106

expand  Expand
2021 03 17 Expand

Correction version 01.29.0106 to SW version 01.29.0001

expand  Expand
2020 12 23 Expand

Software version 01.29.0001

expand  Expand
2020 10 23 Expand

Correction version 01.28.0400 to SW version 01.28.0200

expand  Expand
2020 09 11 Expand

Software version 01.28.0200

expand  Expand
2020 06 10 Expand

Correction version 01.28.0030 to SW version 01.28.0005 and 01.28.0002

expand  Expand
2020 05 22 Expand

Correction version 01.28.0005 to SW version 01.28.0002

expand  Expand
2020 05 18 Expand

Software version 01.28.0002

expand  Expand
2019 12 23 Expand

Correction version 01.27.0360 to SW version 01.27.0200

expand  Expand
2019 12 18 Expand

Correction version 01.27.0351 to SW version 01.27.0001, 01.27.0110 and 01.27.0200

expand  Expand
2019 09 20 Expand

Correction version 01.27.0200 to SW version 01.27.0001, 01.27.0110

expand  Expand
2019 09 11 Expand

Correction version 01.27.0110 to SW version 01.27.0001

expand  Expand
2019 08 02 Expand

Software-Version 01.27.0001

expand  Expand
2019 04 19 Expand

Software-Version 01.26.0001/01.26.0002

expand  Expand
2019 01 25 Expand

Korrekturversion 01.25.0101 zur SW-Version 01.25.0100

expand  Expand
2018 12 21 Expand

Software-Version 01.25.0001

expand  Expand
2018 08 09 Expand

Software-Version 01.24.0001

expand  Expand
2018 05 14 Expand

Software-Version 01.23.0050/51 (Korrekturversion zu 01.23.0001)

expand  Expand
2018 04 27 Expand

Software-Version 01.23.0001

expand  Expand
2018 03 09 Expand

Software-Version 01.22.0150/01.22.0151

expand  Expand
2017 12 23 Expand

Software-Version 01.22.0001

expand  Expand
2017 10 11 Expand

Software-Version 01.21.0500

expand  Expand
2017 07 26 Expand

Software-Version 01.21.0001, ersetzt durch Korrekturversion 01.21.0015

expand  Expand
2017 02 24 Expand

Software-Version 01.20.0150 - KORREKTURVERSION zu 01.20.0001 und 01.20.0100

expand  Expand
2016 12 23 Expand

Software-Version 01.20.0100 - KORREKTURVERSION zu 01.20.0001 - Fonts unter 01.20.0001

expand  Expand
2016 10 28 Expand

Software-Version 01.20.0001 - Neue Fonts für 01.20.xxxx bitte manuell nachladen

expand  Expand
Newer versions (above) no longer suitable for MX32 Rev.5!
2016 05 20 Expand

Software-Version 01.19.0200 - Neue Fonts siehe Eintrag 01.19.0001

expand  Expand
2016 04 20 Expand

Software-Version 01.19.0001 - Neue Fonts für 01.19.xxxx bitte manuell nachladen

expand  Expand
2015 12 07 Expand

Software-Version 01.18.0052 für MX10 Anwendung (und 01.18.0067 mit dem "alten" ZIMO MX1)

expand  Expand
2015 08 14 Expand

Software-Version 01.17

expand  Expand
2014 11 20 Expand

Software-Version 01.15.1120 

expand  Expand
2014 09 01 Expand

Software-Version 01.14.901   

expand   Expand
2014 08 29 Expand

Software-Version 01.14.829   

expand   Expand
2014 08 21  Expand

Software-Version 01.13   

expand   Expand
2012 07 27  Expand

Software-Version 01.12

expand   Expand
2012 01 31  Expand

Software-Version 01.10    

expand   Expand
2012 01 23  Expand

Software-Version 01.09    

expand   Expand
2011 12 23  Expand

Software-Version 01.08    

expand   Expand
2011 08 02  Expand

Software-Version 01.07    

expand   Expand
2011 06 15  Expand

Das fünfte Update nach der Erstauslieferung  . . .   

expand   Expand
2011 03 17 Expand Das vierte Update nach der Erstauslieferung  . . . expand  Expand
2011 01 19 Expand Das dritte Update nach der Erstauslieferung  . . . expand  Expand
2010 12 23 Expand Das zweite Update nach der Erstauslieferung  -  diverse Korrekturen und Ergänzungen expand  Expand
2010 12 01 Expand Das erste Update nach der Erstauslieferung  -  diverse Verbesserungen expandieren  Expand